Featuring advanced ultra-high current single push-pull circuit power, Advanced AL32 Processing Plus, and MM/MC phono equalizer, the Denon PMA-1700NE integrated amplifier delivers extraordinary sound quality with precise detail.
- Stereo amplifier
- 70W per channel (8 ohms)
- AL32 Processing
- USB-DAC
- Precise electrical controls
- MM/MC phono
Engineered with premium Denon technologies, this amplifier drives two channels at 140W.
Advanced AL32 Processing Plus delivers the richly detailed sound the artist intended.
With more than 110 years of audio excellence, Denon products are built to last.
- Rated Output Power – 70W + 70W / (8ohm,20Hz-20kHz,THD0.07%) / 140W + 140W / (4ohm, 1kHz, THD0.7%)
- Speaker Impedance – A or B : 4 ~ 16ohm / A + B : 8 ~ 16ohm
- Frequency Response – 5Hz – 100kHz (0~ -3dB)
- Total Harmonic Distortion – 0.01 % (Rated output: –3 dB), / 8 ohm/ohms, 1 kHz
- Dumping Factor – 100 and over
- Input Sensitivity: Phono input – MM: 2.5 mV / 47 kohm / MC: 200
- RIAA Deviation – 20 Hz – 20 kHz ±0.5 dB (MM/MC)
- Phono Maximum Input – MM : 130mV / 1kHz / MC : 10mV / 1kHz
- Input Sensitivity: CD/LINE/RECORDER – 125 mV / 19 kohm
- Input Sensitivity: Power Amp input – 0.85V / 47kohm (EXT. PRE)
- Signal to Noise Ratio – PHONO (MM): (89dB) / PHONO (MC): (74dB) / CD: (107dB)
- Tone Control – BASS : 100Hz ±8dB / TREBLE : 10kHz ±8dB
- Power Consumption – 295W
- at Standby – 0.2W TV autoplay off / 0.4W TV autoplay on
- Phono Input – Yes (MM / MC) / *default=MM
- Analog Input (include Phono) / REC Out (RCA) – 4/1 (PHONO/ CD/ AUX/ RECORDER)
- Optical input / output (Maximum Support) – 2 / 0 (192kHz/24bit)
- Coaxial input / output (Maximum Support) – 1 / 0 (192kHz/24bit)
- Ext. Pre Input (Power Amp Direct) = Yes(Ext.Pre)
- 2 sets of Speaker Output – Yes (Bi-wiring)
- Speaker Terminal – Gold Plated
- Headphone Output – 1 (Turn off the speaker when inserting headphone)
- AC Inlet – Yes
- Roon Certificaton – Yes(Roon Tested) / TBD
Reviews
There are no reviews yet.