Denon PMA-3000NE 2CH / 160W Integrated Amplifier With MM/MC Phono Stage

• The Denon PMA-3000NE delivers 160W per channel at 4 ohms and 80W per channel at 8 ohms, driving even the most demanding speaker to deliver superior sound in any scenario. Designed and manufactured at Denon facilities in Shirakawa, Japan.

•  2 channels
• 160 watts per channel
• MM/MC phono stage
• Ultra AL32 Processing
• Optical, coaxial, and USB digital connections
• Analog mode

With an advanced push-pull amplifier, sophisticated digital processing, and a robust phono stage, the PMA-3000NE delivers all of your favorite music with clarity and precision.

A push-pull amplifier, delivering 80W/channel into 8 ohms and 160W/channel into 4 ohms, effortlessly accommodates a range of speaker types and impedances.

Digital connections, including optical, coaxial, and USB-B, support up to 384kHz/32- bit. Ultra AL32 Processing waveform interpolation produces smooth, high-resolution sound.

The PMA-3000NE's phono stage supports both MM and MC cartridges, for the most faithful sonic reproduction regardless of cartridge type.

The PMA-3000NE delivers 80W/channel into 8 ohms and 160W/channel into 4 ohms. Its Advance UHC-MOS Single Push-pull Circuit and differential 1-stage amplifier drive demanding speakers with exceptional clarity and linearity.

Rated Output Power

• 80W + 80W
• (8 ohm,20 Hz-20 kHz,THD 0.07%)

• 160W + 160W – (4 ohm, 1 kHz, THD 0.7%)
• Total Harmonic distortion – 0.01 % (Rated output: –3 dB), / 8 ohm/ohms, 1 kHz
• Input Sensitivity: Phono input – MM: 2.5 mV / 47 kohm / MC: 200 μV / 100 ohm
• Input Sensitivity:CD/LINE/RECORDER – 135 mV / 19 kohm
• Input Sensitivity: Power Amp input – 1.0V / 15 kohm (EXT. PRE)
• Signal to Noise Ratio – PHONO (MM): 89 dB / PHONO (MC): 74 dB / CD: 107 dB
• Power Consumption – 400W
• Power Consumption at Standby – 0.2W TV autoplay off / 0.4W TV autoplay on
• Power Amplifier Circuit – New UHC-MOS
• Single Push Pull (7) – Preamplifier Circuit
• Variable Gain Preamplifier (OP AMP) – Bass / Treble / Mid / Balance Control – Yes / Yes / No / Yes
• Source Direct – Yes
• Analog Amp Mode – Yes (button on front panel)
• DAC Circuit – ES9018K2M × 4
• Digital Processing – Ultra AL32 Processing
• DAC Master Clock Design – Yes
• Asyncronous mode (for USB-B input) – Yes
• Phono Input – Yes (MM / MC) / *default = MM
• Analog Input (include Phono) / REC Out (RCA) – 4/1 (Gold Plated) – (Brass Machining type for all CD/PHONO/AUX/RECORDER)
• Optical input / output (Maximum Support) – 3 / 0 (192 kHz/24-bit)
• Coaxial input / output (Maximum Support) – 1 / 0 (192 kHz/24-bit)
• Speaker Terminal – AVR-A1H type Gold Plated w/Cover
• Headphone Output – 1 (Turns off the speaker automatically when headphone is inserted)
• Remote Control – Yes
• Remote Control Bus Terminal – Yes (mini)
• Wi-Fi – No
• HEOS – No
• USB B (USB DAC) – 1 (Rear)
• PCM Sample Rate / Resolution – ~384 kHz/32-bit
• DSD Audio Streaming – ~11.2MHz