- Despite the many kilos of hardware goodies, the output power is limited to humble 2 x 80 watts. However, the power is doubled to 160 watts per. channel into 4 ohms, which testifies to abundant power reserves. That it is not the power but the finesse that is preferred can be seen by the fact that the output power is exactly the same as on the PM-A2500s – and only 10 and 20 watts respectively over the budget model PMA-1600s.
- The output stage is built over a configuration Denon calls Ultra High Current MOS Single Push-Pull Circuit, that consists of just two transistors of the CMOS type. The principle should provide musical benefits, but it sets limits on the output power compared to conventional output stages, where we are used to see rows of parallel-connected bipolar transistors.
- To be fair, this type of output stage is not unique to the PM-A110, but is also found in Denon’s other integrated hi-fi amplifiers. In this case, however, it is all done with hysterical attention to component quality and in a version with fewer stages, that is copied from the very expensive PMA-SX1 amplifier.
- The back of the amp is filled with terminals of the most delicious quality. And extra delicious on the turntable input and “ext pre in”, where the PMA-A110 acts as a pure power amplifier. For example. for the front channels in a home theater system.
- The speaker terminals are large and study, and there is plenty of room for powerful cables. So planty that I almost forgive Denon for plugging the holes for banana plugs. With appropriate amounts of violence, one might be able to get the plugs out, but I did not dare try on a review model.
- For 110 years ,Denon has delivered the most cutting-edge audio and video technical achievements.
Sound master inspired
-
The Denon sound master did’t just tune this products ,he obsessed over it.
High – power, integrated amplifier
-
160 watts of power delivers the most precise and powerfull Denon sound.
Ultra AL32 processing
-
The PMA-A110 IS Equipped with Ultra AL32 Processing, the latest in analog waveform reproduction technology from Denon.
High Precision Electrical Controls
-
The PMA-A110 embrances electrical volume, balance and tone controls while preserving the analog feeling of operation.Clever engineering offers the feel of an analog volume knob while an MCU measures the position of the knob and converts that position to control the master volume digitally.
-
To achieve impeccable balance between delicate details of music reproduction and vigor of low frequency sound,it’s capable of delivering a massive current output in a single push-pull configuration ti drive even the most demanding speaker.
Multiple Digital Input
-
The PMA-A110 features a USB-B input to directly connect a computer and supports PCM signal 384-kHz/32-bit and 11.2-MHz DSD. Use the USB-B input to listen to Hi-Res audio or you can take advantage of three Optical inputs and one Coaxial input which support PCM 192kHz/24-bit.
Reviews
There are no reviews yet.