Canare 2S7F Speaker Cable – 2 Conductor AWG 16 (Made In Japan)

• 2-conductor Speaker Cable
• 2-conductor loud speaker cable for fixed installation.

Key Features and Benefits

• 2-conductor style construction.
• Use in building conduits.
• AWG 16 Cable Gauge (1.27mm²)
• Copper Conductor
• Special supple jacket designed for use in building conduits

Canare’s 2S7F speaker cable from Canare offers a simple but extremely efficient structure, with two copper-insulated condensers with a cross-section of 1.27mm² each. These ensure excellent signal conductivity, where the polyethylene insulation and PVC sheath limit interference and its impact on signal quality.

Special supple jacket designed for use in building conduits

Four-conductor Configuration Minimizes Noise
Speaker cable must accommodate relatively high signal levels, typically tens to hundreds of watts of RMS power. Electromagnetic interference (EMI) can radiate from these speaker lines directly into adjacent low voltage cables (i.e. microphone, video, lines, etc.). Canare solves this problem by using a 4-conductor “Star Quad” configuration in all of our 4S-series speaker cables. Because every conductor is located the same distance from center, the opposing magnetic fields are cancelled out. Attenuation of magnetic field radiation is superior when compared to a standard 2-conductor speaker wire.

Selecting the Right Speaker Cable
Always try to keep speaker cables as short as possible and select cable models that offer a higher damping factor; 20-50 for music (i.e. connect sound) and 10-20 for speech (i.e. sport stadiums).

The greater the damping factor (DF), the better the ability to control speaker excursion to create sharp, clear quality in the low end frequency range

• Sales units (m) n- 100 (Sold By Meter)
• Nom. O.D. (mm) – 6.8
• Weight (kg/100m) – 5.2
• No. of cond. – 2
• Cross sec. area mm2 (AWG) – 1.27 (16)
• Cond. comp Q’ty/mm – 50.018A
• Twist pitch (mm) – 50
• Cond. D.C.R (ohm/100m) – 1.5
• Nom. capacitance pF/m – 56